PVC-based framing trims for Trusscore Wall&CeilingBoard, SlatWall, and RibCore
Trusscore one-piece framing trims require different installation steps than our new snap-in trims.
If your order included these trims, you’re in the right place. This page provides the resources, guides, and installation instructions specific to one-piece trims to help ensure a proper fit and finish for your project.
½” J Trim
A pre-punched perimeter trim used to frame Trusscore Wall&CeilingBoard installations in residential, commercial, and agricultural applications.
Use for:
- Top and bottom of walls
- Window and door perimeters
- Inside corners
| Length | Color | Product SKU |
|---|---|---|
| 10' | White | TCT12J10 |
| Gray | GTCT12J10 |
| Product Compatibility | |
|---|---|
| Wall&CeilingBoard | |
| SlatWall | |
| RibCore | |
¾” J Trim
A perimeter trim used to frame Trusscore SlatWall and RibCore by Trusscore installations.
Use for:
- Top and bottom of walls
- Inside corners
- SlatWall framing
| Length | Color | Product SKU |
|---|---|---|
| 10' | White | RCT34J10 |
| Gray | GRCT34J10 |
| Product Compatibility | |
|---|---|
| Wall&CeilingBoard | |
| SlatWall | |
| RibCore | |
H Channel Snap-In Kit
A two-piece trim featuring a U-Channel base that's designed to address panel joints, product transitions, and to accommodate panel expansion or contraction.
Use for:
- Panel joints
- Product transitions
| Length | Color | Product SKU |
|---|---|---|
| 10' | White | TLT58WTC10K |
| Gray | GTLT58HC10K |
| Product Compatibility | |
|---|---|
| Wall&CeilingBoard | |
| SlatWall | |
| RibCore | |
Inside Cove Corner
A concave trim designed to complete inside corners with a clean and seamless finish. This trim is easy to clean and can be used to direct water away from walls in high moisture environments.
Use for:
- Inside corners
- Top and bottom of walls
| Length | Color | Product SKU |
|---|---|---|
| 10' | White | TCT12IC10 |
| Gray | GTCT12IC10 |
| Product Compatibility | |
|---|---|
| Wall&CeilingBoard | |
| SlatWall | |
| RibCore | |
One-Piece Trim Resources
From product specs and application guides to installation walkthroughs and technical references — everything you need, in one place.
Videos
Full-length installs for each product, plus short Quick Tips for the tricky bits.
Installing Trusscore Wall&CeilingBoard Panels Horizontally
Discover the best practices for horizontally installing Trusscore Wall&CeilingBoard panels. This detailed guide provides expert tips to help you achieve precise alignment and a clean, polished look for your walls and ceilings.
Installing Trusscore Wall&CeilingBoard Panels Vertically
Learn how to vertically install Trusscore Wall&CeilingBoard panels with our comprehensive tutorial. Follow our step-by-step instructions to achieve a smooth, professional finish, ensuring your walls and ceilings look flawless.
Installing Trusscore Wall&CeilingBoard and Trusscore SlatWall
See how easy it is to install Trusscore Wall&CeilingBoard and seamlessly integrate Trusscore SlatWall using Trusscore Trims with this step-by-step tutorial.
Installing RibCore by Trusscore
RibCore by Trusscore is a high-strength PVC corrugated panel that’s long-lasting, cost effective, and easy to maintain. Keep watching for a detailed installation guide, also featuring tips, time-saving suggestions, and some must-do’s for a successful RibCore installation.
How to Cut J Trim Using Tin Snips
Cut Trusscore Trim with ease using tin snips. Get the tips and tricks for a flawless, clean cut in seconds!
How to Insert a Trusscore Panel into Trim Using J Trim
Watch and learn the simple trick to effortlessly insert a Trusscore panel into trim using an additional piece of trim for a smooth, professional finish.
How to Trim Out a Wall and Ceiling with Trusscore
Kyle of RR Buildings shows how to trim Trusscore panels for corner areas.
How to Add Drainage Holes to J Trim
Kyle of RR Buildings shows how to add drainage holes into Trusscore’s J-Trim.
Documents
Every document available for the one-piece system, in one place.
Product sheets
Application sheets
Brochures
Retailer reference
Installation guides
QuickStart guides
Technical guides
Trim Installation Tips
Like all Trusscore products, trims require no special tools or skills to install. Simply follow these tips and recommendations to ensure a seamless installation process.
Cutting Trims
Spacing Trims
Fastening Trims
Trusscore trims can be installed with any readily available wood (corrosion-resistant) screws with a minimum head diameter of 3/8", but we recommend different types of screws for different wall assemblies:
| Wall Assembly | Screw Recommendation | Screw Length |
|---|---|---|
|
Wood |
#8 or #10 truss head, pancake head, round or washer head, cabinet, or other low profile screws. | 1 ¼" 1 ¾" to 2" 2 ½" 2" to 2 ½" |
| Concrete | 3/16" x Flathead screw (Tapcon). | 1 ¼" |
| Metal or Steel Studs | Self-tapping #8 or #10 low profile head as above. | 1 ¼" |
Stainless steel screws are only required for highly corrosive or moist environments. Trims should be screwed into the substrate at least once every 24" and least 4" from the end of the panel.
Corner trims are the exception. Large and small Outside Corner trims should be installed with silicone caulk adhesive to avoid visible screws.
