Review your materials breakdown below and connect with a Trusscore retailer near you to fine-tune your project plans.
Budgetary Materials Estimate:
| USD |
|---|
| $7500 |
This estimate is based on your inputs and average national pricing for estimation purposes only — actual product quantities and costs may vary. Above estimate does not include taxes.
Use this Cost & Materials Estimate, featuring a detailed material list and product placement guide, to easily order all the products needed for your Trusscore project with your local retailer.
| Project Name: | Rodenbaugh shop |
|---|---|
| Customer Name: | Dennis Rodenbaugh |
| Email: | rodenbaughdennis@gmail.com |
| Application: | Garage |
| Room Dimensions (L x W): | 44 ft x 28 ft |
| Ceiling Height: | 16 ft |
| Wall&CeilingBoard Color: | White |
| Wall&CeilingBoard Orientation: | Vertical |
| Number of Garage Doors: | 1 |
| Garage Door Dimensions (W x H): | 18.5 ft x 15 ft |
Materials List | The following Trusscore products are used in this design
| PRODUCT | PRODUCT # | QTY | LINEAR FT | SQUARE FT | |
|---|---|---|---|---|---|
| 1Wall&CeilingBoard 8' White | TC1608 | 2 | 16 | 21 | |
| 2Wall&CeilingBoard 16' White | TC1616 | 95 | 1520 | 2027 |
| PRODUCT | PRODUCT # | QTY | LINEAR FT | |
|---|---|---|---|---|
| 1J Trim 1/2" 10' White | TCT12J10 | 42 | 420 |
Screws - We recommend using different screw types and lengths for different wall assemblies.
| RECEIVING WALL | SCREW RECOMMENDATION | SCREW LENGTH | |
|---|---|---|---|
| Wood Stud | #8/#10 Truss head, pancake head, round or washer head, cabinet, and other low profile screws | 1 ¼” | |
| Drywall | 1-3/4" to 2" | ||
| Furring Strips/Strapping | 2 ½” | ||
| Plaster | 2" to 2 ½” | ||
| Concrete | 3/16“ Flathead Tapcon | 1 ¼” | |
| Metal or Steel Studs | Self-Tapping #8/#10 Low profile head as above | 1 ¼” | |
| SCREWS REQUIRED | 210 | ||
Product Placement Guide | Detailed wall & ceiling breakdown of estimated materials list
| LOCATION | DIMENSIONS | MATERIALS LIST | ||
|---|---|---|---|---|
| QTY | PRODUCT | COLOR | ||
Wall 1 |
28' x 16' | 2 | TC1608 Wall&CeilingBoard 8' White |
White |
| 8 | TC1616 Wall&CeilingBoard 16' White |
White | ||
| 9 | TCT12J10 J Trim 1/2" 10' White |
White | ||
Wall 2 |
44' x 16' | 33 | TC1616 Wall&CeilingBoard 16' White |
White |
| 12 | TCT12J10 J Trim 1/2" 10' White |
White | ||
Wall 3 |
28' x 16' | 21 | TC1616 Wall&CeilingBoard 16' White |
White |
| 9 | TCT12J10 J Trim 1/2" 10' White |
White | ||
Wall 4 |
44' x 16' | 33 | TC1616 Wall&CeilingBoard 16' White |
White |
| 12 | TCT12J10 J Trim 1/2" 10' White |
White | ||
Estimating Trim for Windows & Doors - Trim quantities above include top, bottom, inside corners, and garage doors. Use the instructions to determine the trim type and quantity you'll need for windows and doors, and include them in your material order.
STEP 1 - Measure the perimeter of each opening in your project
Pro Tip - Add 5% extra to each perimeter measurement to ensure you have enough trim
STEP 2 - Determine the type of trim you need
To learn more about Trusscore trims, visit trusscore.com/trims
½" J Trim - Use for framing openings when they are flush to the wall.
¾" J Trim - Use for framing openings that are surrounded by Trusscore SlatWall.
Outside Corner Trim - Use for framing windows that have a sill or openings that are set into the wall. Available in small (1 ¼" x 1 ¼") or large (2" x 2") sizes.
H Channel Snap-In Trim - Use as an alternative to ½" J Trim for framing openings that are flush to the wall, or when there is a Trusscore Wall&CeilingBoard and Trusscore SlatWall panel transition directly beside the opening.
STEP 3 - Calculate the amount of additional trim required for windows & doors
- All Trusscore trims for framing or finishing openings are available in 10ft lengths.
- Add up your perimeter measurements for each trim type and color and enter it in the table below.
- Divide each perimeter measurement by 10 to determine the amount of trim required.
- Always round up to ensure you have enough trim to finish.
- Enter that amount in the Quantity column.
| ADDITIONAL TRUSSCORE TRIMS REQUIRED FOR WINDOWS & DOORS | ||||||||
|---|---|---|---|---|---|---|---|---|
| PRODUCT | LENGTH | WHITE | GRAY | |||||
| PRODUCT # | LINEAR FEET |
QUANTITY (PERIMETER ÷10) |
PRODUCT # | LINEAR FEET |
QUANTITY (PERIMETER ÷10) |
|||
| ½" J Trim for Wall&CeilingBoard |
10ft |  TCT12J10 |
 GTCT12J10 |
|||||
| ¾" J Trim for SlatWall |
10ft |  RCT34J10 |
 GRCT34J10 |
|||||
| Large Outside Corner (2") |
10ft |  TCT12LOC10 |
 GTCT12LOC10 |
|||||
| Small Outside Corner (1 ¼") |
10ft |  TCT12OC10 |
 GTCT12OC10 |
|||||
| H Channel Snap-In Kit |
10ft |  TLT58WTC10K |
 GTLT58HC10K |
|||||
Put the finishing touch on your Trusscore SlatWall with SlatWall Accessories that snap into place and can be easily moved around as your storage needs change.
Explore accessories by visiting trusscore.com/slatwall/accessories
Rodenbaugh shop Project Notes:
2025-11-29 12:33:25 PM
Openings & Features to Trim - Five (5) 3’ x 3’ windows - One entry door - One 18’6” x 15’ garage door (trim jambs only using Outside Corner Trim) - Basketball backboard box-out (~30” x 36” x 3” deep) - Cabinet terminations (optional trim) Installation Notes • Panels installed vertically from floor to ceiling. • Base Trim installed along all walls except garage door opening. • Top Cap trim installed along entire perimeter where PVC meets ceiling. • Furring strips required due to inconsistent stud spacing (15–17”). • Basketball mount requires custom box-out using panel offcuts + outside corner trim. • Cabinet section can be optionally trimmed with J-channel depending on layout. Trusscore Material Order Sheet Project: Parkville Shop – 44’ x 28’ x 16’ Materials Required Trusscore Wall&CeilingBoard 16" x 16' (TC1616): 110 panels Base Trim 16' (TCBASE16): 9 pieces Top Cap / L-Trim 16' (TCLCAP16): 10 pieces Inside Corner Trim 16' (TCIC16): 5 pieces Outside Corner Trim 16' (TCOC16): 5 pieces J-Channel Trim 16' (TCJ16): 8 pieces H-Trim 16' (TCH16): 1 piece 1x4x16' Kiln-Dried Furring Strips: 22 pieces #10 × 1¼" Stainless Pan-Head Screws: 1,500 screws #10 × 2" Coated Construction Screws: 400 screws White Silicone Sealant: 8 tubes Loctite PL Premium Construction Adhesive: 4 tubes Special Notes - Outside Corner Trim to be used on both garage door jambs and basketball box-out. - J-Channel to be used around 5 windows, entry door, cabinet terminations, and electrical box. - Panels installed vertically full height (16 ft).
2025-11-27 11:56:27 AM
There are 5 windows, 3X3’ square each. There are two other areas I’ll need to trim around that are 3X5 and 2X2.