Print Detailed Materials Estimate
Trusscore
Cost & Materials Estimate

Review your materials breakdown below and connect with a Trusscore retailer near you to fine-tune your project plans.

Placeholder Image

Budgetary Materials Estimate:

USD
$10500

This estimate is based on your inputs and average national pricing for estimation purposes only — actual product quantities and costs may vary. Above estimate does not include taxes.

Use this Cost & Materials Estimate, featuring a detailed material list and product placement guide, to easily order all the products needed for your Trusscore project with your local retailer.

Project Name:Parker Sports Barn
Customer Name:Mike Parker
Email:alaskapilot75@gmail.com
Application:Garage
Room Dimensions (L x W):72 ft x 36 ft
Ceiling Height:14 ft
Wall&CeilingBoard Color:Gray
Wall&CeilingBoard Orientation:Vertical
Number of Garage Doors:2
Garage Door Dimensions (W x H):12 ft x 13 ft
 Add Additional Project Notes

Materials List | The following Trusscore products are used in this design

Trusscore Wall&CeilingBoard & Trusscore SlatWall - The suggested product lengths minimize waste — Wall&CeilingBoard comes in 8, 10, 12, 14, 16, and 20ft lengths, and SlatWall is available in 8ft lengths, both in white and gray.
PRODUCT PRODUCT # QTY LINEAR FT SQUARE FT
1Wall&CeilingBoard 14' Gray GTC1614 144 2016 2688
2Wall&CeilingBoard 8' Gray GTC1608 3 24 32
Trusscore Trims for Walls & Ceiling - Quantities include trims for the top, bottom, inside corners, and around garage doors. Review instructions below to estimate trims around additional windows and entry doors.
PRODUCT PRODUCT # QTY LINEAR FT
1J Trim 1/2" 10' Gray GTCT12J10 56 560

Screws - We recommend using different screw types and lengths for different wall assemblies. For specific screw recommendations, visit trusscore.com/screws

RECEIVING WALL SCREW RECOMMENDATION SCREW LENGTH
Wood Stud #8/#10 Truss head, pancake head, round or washer head, cabinet, and other low profile screws 1 ¼”
Drywall 1-3/4" to 2"
Furring Strips/Strapping 2 ½”
Plaster 2" to 2 ½”
Concrete 3/16“ Flathead Tapcon 1 ¼”
Metal or Steel Studs Self-Tapping #8/#10 Low profile head as above 1 ¼”
SCREWS REQUIRED 280

Product Placement Guide | Detailed wall & ceiling breakdown of estimated materials list

LOCATION DIMENSIONS MATERIALS LIST
QTY PRODUCT COLOR

Wall 1 		36' x 14' 27 GTC1614
Wall&CeilingBoard 14' Gray		 Gray
10 GTCT12J10
J Trim 1/2" 10' Gray		 Gray

Wall 2 		72' x 14' 3 GTC1608
Wall&CeilingBoard 8' Gray		 Gray
36 GTC1614
Wall&CeilingBoard 14' Gray		 Gray
18 GTCT12J10
J Trim 1/2" 10' Gray		 Gray

Wall 3 		36' x 14' 27 GTC1614
Wall&CeilingBoard 14' Gray		 Gray
10 GTCT12J10
J Trim 1/2" 10' Gray		 Gray

Wall 4 		72' x 14' 54 GTC1614
Wall&CeilingBoard 14' Gray		 Gray
18 GTCT12J10
J Trim 1/2" 10' Gray		 Gray

Estimating Trim for Windows & Doors - Trim quantities above include top, bottom, inside corners, and garage doors. Use the instructions to determine the trim type and quantity you'll need for windows and doors, and include them in your material order.

STEP 1 - Measure the perimeter of each opening in your project

Pro Tip - Add 5% extra to each perimeter measurement to ensure you have enough trim

STEP 2 - Determine the type of trim you need

To learn more about Trusscore trims, visit trusscore.com/trims

½" J Trim - Use for framing openings when they are flush to the wall.

¾" J Trim - Use for framing openings that are surrounded by Trusscore SlatWall.

Outside Corner Trim - Use for framing windows that have a sill or openings that are set into the wall. Available in small (1 ¼" x 1 ¼") or large (2" x 2") sizes.

H Channel Snap-In Trim - Use as an alternative to ½" J Trim for framing openings that are flush to the wall, or when there is a Trusscore Wall&CeilingBoard and Trusscore SlatWall panel transition directly beside the opening.

STEP 3 - Calculate the amount of additional trim required for windows & doors
  • All Trusscore trims for framing or finishing openings are available in 10ft lengths.
  • Add up your perimeter measurements for each trim type and color and enter it in the table below.
  • Divide each perimeter measurement by 10 to determine the amount of trim required.
  • Always round up to ensure you have enough trim to finish.
  • Enter that amount in the Quantity column.
ADDITIONAL TRUSSCORE TRIMS REQUIRED FOR WINDOWS & DOORS
PRODUCT LENGTH WHITE GRAY
PRODUCT # LINEAR
FEET		 QUANTITY
(PERIMETER ÷10)		 PRODUCT # LINEAR
FEET		 QUANTITY
(PERIMETER ÷10)
½" J Trim
for Wall&CeilingBoard		 10ft ½" J TrimTCT12J10     ½" J TrimGTCT12J10    
¾" J Trim
for SlatWall		 10ft ¾" J TrimRCT34J10     ¾" J TrimGRCT34J10    
Large Outside
Corner (2")		 10ft Large Outside Corner (2")TCT12LOC10     Large Outside Corner (2")GTCT12LOC10    
Small Outside
Corner (1 ¼")		 10ft Small Outside Corner (1 ¼")TCT12OC10     Small Outside Corner (1 ¼")GTCT12OC10    
H Channel
Snap-In Kit		 10ft H Channel Snap-In KitTLT58WTC10K     H Channel Snap-In KitGTLT58HC10K    
Put the finishing touch on your Trusscore SlatWall with SlatWall Accessories that snap into place and can be easily moved around as your storage needs change.
Explore accessories by visiting trusscore.com/slatwall/accessories

Parker Sports Barn Project Notes:

2026-03-12 07:54:38 PM

Along the front elevation, there is a third garage door that measures 12'w by 10' tall.  Also, there is a standard steel man-door.  This is a pole framed building.  The poles will not be wrapped in your product, they will be exposed.  I would like to determine the exact width of each span or distance between poles so we can choose the best  panel width.  The panel length is 14' and will be mounted vertically.

 Print Detailed Materials Estimate