Print Detailed Materials Estimate
Trusscore
Cost & Materials Estimate

Review your materials breakdown below and connect with a Trusscore retailer near you to fine-tune your project plans.

Placeholder Image

Budgetary Materials Estimate:

USD
$2300

This estimate is based on your inputs and average national pricing for estimation purposes only — actual product quantities and costs may vary.

Use this Cost & Materials Estimate, featuring a detailed material list and product placement guide, to easily order all the products needed for your Trusscore project with your local retailer.

Customer Name:Ron Edgar
Email:ron.edg@gmail.com
Application:Interior
Room Dimensions:11.5ft x 9.5ft
Ceiling Height:7.2ft
Ceiling Color:White
Wall&CeilingBoard Color:Gray
Wall&CeilingBoard Orientation:Horizontal
SlatWall Coverage:0.5
SlatWall Color:White

Materials List | The following Trusscore products are used in this design

Trusscore Wall&CeilingBoard & Trusscore SlatWall - The suggested product lengths minimize waste — Wall&CeilingBoard comes in 8, 10, 12, 14, 16, and 20ft lengths, and SlatWall is available in 8ft lengths, both in white and gray.
PRODUCT PRODUCT # QTY LINEAR FT SQUARE FT
1Wall&CeilingBoard 12' Gray GTC1612 6 72 96
2Wall&CeilingBoard 10' Gray GTC1610 6 60 80
3SlatWall 8' White TL1841608 40 320 160
Trusscore Trims for Walls & Ceiling - Quantities include trims for the top, bottom, inside corners, and around garage doors. Review instructions below to estimate trims around additional windows and entry doors.
PRODUCT PRODUCT # QTY LINEAR FT
1J Trim 1/2" 10' Gray GTCT12J10 8 80
2H Trim 10' White TLT58WTC10K 4 40
3J Trim 3/4" 10' White RCT34J10 8 80
4J Trim 1/2" 10' White TCT12J10 5 50

Screws - We recommend using different screw types for different wall assemblies. Check the Wall&CeilingBoard installation guide to find the best option for your project.

RECEIVING WALL SCREW RECOMMENDATION
Wood Stud or Backer #10 x 1 ¼" Truss or Pancake Head
Concrete 3/6" x 1 ¼" Flathead Tapcon
Metal or Steel Studs Self-Tapping #10 x 1 ¼" Truss or Pancake Head
SCREWS REQUIRED 509

Product Placement Guide | Detailed wall & ceiling breakdown of estimated materials list

LOCATION DIMENSIONS MATERIALS LIST
QTY PRODUCT COLOR

Ceiling 1 		11.5' x 9.5' 9 TC1610
Wall&CeilingBoard 10' White		 White
5 TCT12J10
J Trim 1/2" 10' White		 White

Wall 1 		11.5' x 7.2' 3 GTC1612
Wall&CeilingBoard 12' Gray		 Gray
11 TL1841608
SlatWall 8' White		 White
2 GTCT12J10
J Trim 1/2" 10' Gray		 Gray
2 RCT34J10
J Trim 3/4" 10' White		 White
1 TLT58WTC10K
H Trim 10' White		 White

Wall 2 		9.5' x 7.2' 3 GTC1610
Wall&CeilingBoard 10' Gray		 Gray
9 TL1841608
SlatWall 8' White		 White
2 GTCT12J10
J Trim 1/2" 10' Gray		 Gray
2 RCT34J10
J Trim 3/4" 10' White		 White
1 TLT58WTC10K
H Trim 10' White		 White

Wall 3 		11.5' x 7.2' 3 GTC1612
Wall&CeilingBoard 12' Gray		 Gray
11 TL1841608
SlatWall 8' White		 White
2 GTCT12J10
J Trim 1/2" 10' Gray		 Gray
2 RCT34J10
J Trim 3/4" 10' White		 White
1 TLT58WTC10K
H Trim 10' White		 White

Wall 4 		9.5' x 7.2' 3 GTC1610
Wall&CeilingBoard 10' Gray		 Gray
9 TL1841608
SlatWall 8' White		 White
2 GTCT12J10
J Trim 1/2" 10' Gray		 Gray
2 RCT34J10
J Trim 3/4" 10' White		 White
1 TLT58WTC10K
H Trim 10' White		 White

Estimating Trim for Windows & Doors - Trim quantities above include top, bottom, inside corners, and garage doors. Use the instructions to determine the trim type and quantity you'll need for windows and doors, and include them in your material order.

STEP 1 - Measure the perimeter of each opening in your project

Pro Tip - Add 5% extra to each perimeter measurement to ensure you have enough trim

STEP 2 - Determine the type of trim you need

To learn more about Trusscore trims, visit trusscore.com/trims

½" J Trim - Use for framing openings when they are flush to the wall.

¾" J Trim - Use for framing openings that are surrounded by Trusscore SlatWall.

Outside Corner Trim - Use for framing windows that have a sill or openings that are set into the wall. Available in small (1 ¼" x 1 ¼") or large (2" x 2") sizes.

H Channel Snap-In Trim - Use as an alternative to ½" J Trim for framing openings that are flush to the wall, or when there is a Trusscore Wall&CeilingBoard and Trusscore SlatWall panel transition directly beside the opening.

STEP 3 - Calculate the amount of additional trim required for windows & doors
  • All Trusscore trims for framing or finishing openings are available in 10ft lengths.
  • Add up your perimeter measurements for each trim type and color and enter it in the table below.
  • Divide each perimeter measurement by 10 to determine the amount of trim required.
  • Always round up to ensure you have enough trim to finish.
  • Enter that amount in the Quantity column.
ADDITIONAL TRUSSCORE TRIMS REQUIRED FOR WINDOWS & DOORS
PRODUCT LENGTH WHITE GRAY
PRODUCT # LINEAR
FEET		 QUANTITY
(PERIMETER ÷10)		 PRODUCT # LINEAR
FEET		 QUANTITY
(PERIMETER ÷10)
½" J Trim 10ft ½" J TrimTCT12J10     ½" J TrimGTCT12J10    
¾" J Trim 10ft ¾" J TrimRCT34J10     ¾" J TrimGRCT34J10    
Large Outside
Corner (2")		 10ft Large Outside Corner (2")TCT12LOC10     Large Outside Corner (2")GTCT12LOC10    
Small Outside
Corner (1 ¼")		 10ft Small Outside Corner (1 ¼")TCT12OC10     Small Outside Corner (1 ¼")GTCT12OC10    
H Channel
Snap-In Kit		 10ft H Channel Snap-In KitTLT58WTC10K     H Channel Snap-In KitGTLT58HC10K    
Put the finishing touch on your Trusscore SlatWall with SlatWall Accessories that snap into place and can be easily moved around as your storage needs change.
Explore accessories by visiting trusscore.com/slatwall/accessories
Print Detailed Materials Estimate