Review your materials breakdown below and connect with a Trusscore retailer near you to fine-tune your project plans.
Budgetary Materials Estimate:
| USD |
|---|
| $8300 |
This estimate is based on your inputs and average national pricing for estimation purposes only — actual product quantities and costs may vary.
Use this Cost & Materials Estimate, featuring a detailed material list and product placement guide, to easily order all the products needed for your Trusscore project with your local retailer.
| Customer Name: | Mark Wolff |
|---|---|
| Email: | markwollff@mpwconstruction.us |
| Application: | Interior |
| Room Dimensions: | 1 ft x 110 ft |
| Ceiling Height: | 9 ft |
| Wall&CeilingBoard Color: | White |
| Wall&CeilingBoard Orientation: | Vertical |
Materials List | The following Trusscore products are used in this design
| PRODUCT | PRODUCT # | QTY | LINEAR FT | SQUARE FT | |
|---|---|---|---|---|---|
| 1Wall&CeilingBoard 10' White | TC1610 | 168 | 1680 | 2240 |
| PRODUCT | PRODUCT # | QTY | LINEAR FT | |
|---|---|---|---|---|
| 1J Trim 1/2" 10' White | TCT12J10 | 52 | 520 |
Screws - We recommend using different screw types for different wall assemblies. Check the Wall&CeilingBoard installation guide to find the best option for your project.
| RECEIVING WALL | SCREW RECOMMENDATION |
|---|---|
| Wood Stud or Backer | #10 x 1 ¼" Truss or Pancake Head |
| Concrete | 3/6" x 1 ¼" Flathead Tapcon |
| Metal or Steel Studs | Self-Tapping #10 x 1 ¼" Truss or Pancake Head |
| SCREWS REQUIRED | 260 |
Product Placement Guide | Detailed wall & ceiling breakdown of estimated materials list
| LOCATION | DIMENSIONS | MATERIALS LIST | ||
|---|---|---|---|---|
| QTY | PRODUCT | COLOR | ||
Wall 1 |
1' x 9' | 1 | TC1610 Wall&CeilingBoard 10' White |
White |
| 2 | TCT12J10 J Trim 1/2" 10' White |
White | ||
Wall 2 |
110' x 9' | 83 | TC1610 Wall&CeilingBoard 10' White |
White |
| 24 | TCT12J10 J Trim 1/2" 10' White |
White | ||
Wall 3 |
1' x 9' | 1 | TC1610 Wall&CeilingBoard 10' White |
White |
| 2 | TCT12J10 J Trim 1/2" 10' White |
White | ||
Wall 4 |
110' x 9' | 83 | TC1610 Wall&CeilingBoard 10' White |
White |
| 24 | TCT12J10 J Trim 1/2" 10' White |
White | ||
Estimating Trim for Windows & Doors - Trim quantities above include top, bottom, inside corners, and garage doors. Use the instructions to determine the trim type and quantity you'll need for windows and doors, and include them in your material order.
STEP 1 - Measure the perimeter of each opening in your project
Pro Tip - Add 5% extra to each perimeter measurement to ensure you have enough trim
STEP 2 - Determine the type of trim you need
To learn more about Trusscore trims, visit trusscore.com/trims
½" J Trim - Use for framing openings when they are flush to the wall.
¾" J Trim - Use for framing openings that are surrounded by Trusscore SlatWall.
Outside Corner Trim - Use for framing windows that have a sill or openings that are set into the wall. Available in small (1 ¼" x 1 ¼") or large (2" x 2") sizes.
H Channel Snap-In Trim - Use as an alternative to ½" J Trim for framing openings that are flush to the wall, or when there is a Trusscore Wall&CeilingBoard and Trusscore SlatWall panel transition directly beside the opening.
STEP 3 - Calculate the amount of additional trim required for windows & doors
- All Trusscore trims for framing or finishing openings are available in 10ft lengths.
- Add up your perimeter measurements for each trim type and color and enter it in the table below.
- Divide each perimeter measurement by 10 to determine the amount of trim required.
- Always round up to ensure you have enough trim to finish.
- Enter that amount in the Quantity column.
| ADDITIONAL TRUSSCORE TRIMS REQUIRED FOR WINDOWS & DOORS | ||||||||
|---|---|---|---|---|---|---|---|---|
| PRODUCT | LENGTH | WHITE | GRAY | |||||
| PRODUCT # | LINEAR FEET |
QUANTITY (PERIMETER ÷10) |
PRODUCT # | LINEAR FEET |
QUANTITY (PERIMETER ÷10) |
|||
| ½" J Trim | 10ft |  TCT12J10 |
 GTCT12J10 |
|||||
| ¾" J Trim | 10ft | RCT34J10 |
GRCT34J10 |
|||||
| Large Outside Corner (2") |
10ft |  TCT12LOC10 |
 GTCT12LOC10 |
|||||
| Small Outside Corner (1 ¼") |
10ft |  TCT12OC10 |
 GTCT12OC10 |
|||||
| H Channel Snap-In Kit |
10ft |  TLT58WTC10K |
 GTLT58HC10K |
|||||