When it’s time to create a temporary construction wall for safety and dust control, to advertise vacant tenant spaces in shopping centers, or to create private zones like dressing rooms in retail facilities and suites in sports arenas, a modular wall system is a must have. No matter your needs, Trusscore modular and freestanding solutions have you covered.
A PVC, Modular Alternative to Drywall and Plywood for Temporary Partition and Hoarding Walls
Traditional interior partition and construction hoarding walls are made from drywall and plywood, but traditional isn’t always best. Drywall in general is bad for the environment, and it’s even worse as a construction hoarding wall. When you no longer need a barricade, the drywall is torn down and disposed of in a landfill, where it decomposes to produce hydrogen sulfide gas and leachate chemicals like sulfates.
| Drywall Barricade Waste | |||
| Barricade Size | Barricade Dimensions | Square Footage | Average Landfill Waste |
|---|---|---|---|
| Small | 25’ x 12’ | 300 | 900 lbs |
| Medium | 40’ x 12’ | 480 | 1,400 lbs |
| Large | 65’ x 12’ | 780 | 2,340 lbs |
Installing a drywall partition is also a multi-day process that requires messy steps like mudding, taping, and painting. And if you plan to vinyl wrap it, you’ll need to add extra time for installation. Drywall has to be prepped, primed, and cleaned to ensure vinyl graphics adhere to it properly. Even then, the nature and surface texture of drywall can cause vinyl graphics to look cheap, peel off, and have poor adhesion.
Plywood enclosures are also single use just like drywall, meaning they’re also bad for the environment, and they’re a pain to wrap, too – for vinyl to be wrapped on unfinished wood, the wood needs to be sanded, coated in paint or a clear coat, and left to cure. At minimum, this is a 24-hour process.
The Sustainable Solution for Partition and Hoarding Walls
Trusscore products offer a sustainable alternative that’s ready to wrap and installs in a single day. Made from PVC, Trusscore products are quick and easy to assemble and can be used to create modular walls and non-load bearing partitions in any interior commercial space.
Trusscore Wall&CeilingBoard
Interlocking PVC interior wall and ceiling panels that are lightweight, low maintenance, and can be installed directly on framing of any size.
Norlock by Trusscore
Durable freestanding, interlocking divider planks for interior walls, non-load bearing partitions, and for construction hoarding.
Panels come in a variety of lengths and have a tight fitting, tongue-and-groove interlocking system to let you create a seamless, branded barricade of any size with no external support necessary. As your needs change, Trusscore Wall&CeilingBoard and NorLock by Trusscore can be easily taken apart and reinstalled into a new setup without the panels ever being damaged, or it can be left alone for years. It’s the perfect partition wall system in any space. It’s the perfect partition wall system in any space and can be used for a wide variety of applications.
Retail & Mall Renovations
New Building Construction Sites
Airport Construction
Event Spaces
Why Choose Trusscore for Your Construction Hoarding Wall Needs?
Solide et durable
Trusscore Wall&CeilingBoard and NorLock panels are scratch, dent, and damage resistant, meaning they can withstand repeated handling and installation. And when you’re dealing with long-term vacancies or permanent in-store structures like dressing rooms, the panels help you create partition walls that are built to last. Since drywall and plywood are prone to damage, they aren’t the best investment in high-traffic areas. Trusscore products, on the other hand, are high impact tested, meaning they can withstand anything you throw at them in a commercial setting.
Wrappable & Customizable
Trusscore products can be installed as is — meaning plain white or, if you’re installing Trusscore Wall&CeilingBoard, in gray, too — or it can be completely wrapped in vinyl graphics that match your corporate branding or act as your very own billboard. Since the panels are pre-finished, graphics can be installed right away, so you won’t have to sand or coat the panels like you would with plywood. Plus, the removal of graphics and reuse of the panels is quick and easy. If you choose to pass on vinyl graphics, you can also keep your Trusscore panels looking their best — they can be easily cleaned with soap and water to take care of marks made from dirty hands during install or from people passing by.
Rapide et facile à installer
Installing a drywall partition wall or barricade is a multi-day process that requires messy steps like mudding and taping. Pre-finished and lightweight Trusscore panels go up without dust like drywall containing the job site from day one. Since the panels have an interlocking system, you can easily build a large-scale modular wall or freestanding commercial or construction barricade in no time. And in cases where you’re covering up a vacant tenant space, a partition built with Trusscore can be quickly disassembled before a grand opening while leaving no trace and easily transported to the next location — the same can’t be said about drywall.
Respect de l'environnement
Plywood and drywall are single use products that can’t be repurposed once your need for a partition wall is no more. Instead, they’ll end up in the landfill. In fact, a single large barricade (which averages around 780 square feet) made from drywall creates over 2300 pounds of landfill waste. Trusscore is designed to outlive the buildings it’s installed in and can be repeatedly taken apart and put back together, extending the length of its life. Panels are also made from PVC, which is a 100% recyclable material, and they can be recycled to make new PVC-based products.
